our is a manufacturer of face masks and personal protective equipments(PPE) both for the medical community and civil community.
  TEL:+86 139 2925 1282


Procedures And Precautions For Putting On And Taking Off Protective Gown

Procedures And Precautions For Putting On And Taking Off Protective Gown

Protective gown supplier will share this article with you.

1. Preparation before wearing protective gown

The protective gown must be inspected before wearing it, not based on personal experience alone, otherwise it may cause serious safety accidents.

1)The protection level and performance of the protective gown are consistent with the performance required by the occasion.

2)Confirm the size of protective gown. Before wearing, make sure that the size of the protective gown is suitable for your own size. Too big or too small will cause inconvenience or accidental damage or tearing during work.

3)Check the overall integrity of the protective gown. Such as whether the surface of the protective gown is contaminated, whether there is cracking at the seam, etc. Remove sharp objects and remove unnecessary keys and pendants from the body to avoid damage to the protective gown during work.

4)If it is A-level fully enclosed chemical protective clothing, it is necessary to use a professional air-tightness detector for air-tightness testing on a regular basis, so that it can be used in an emergency situation.

2. How to wear protective gown

The wearing of protective gown must follow a certain order, so as to ensure that the protective gown is worn correctly and quickly, to play the role of the protective gown at work, and to lay the foundation for safe removal after use.

1)Unfold the anti-chemical work clothes (the hood faces you, opening upwards);

2)Open the neck and chest of the chemical protective gown, stretch both legs into the trousers one after another, put on the top and fasten the belt.

3)After putting on the gas mask, check the airtightness of the gas mask at the first time, and after confirming that it is correct, tie up the protective suit and tie the neck strap;

4)Put on protective gloves, lower the outer sleeves and fasten them.

3. Methods of taking off protective gown

The principle to be followed when taking off protective gown is to take off protective gown safely without causing pollution to the human body and the environment. It should be noted here that the necessary cleaning and decontamination must be carried out before taking off the chemical protective gown. The cleaning and decontamination of protective gown is mainly to ensure that the operators will not be injured by the toxic and hazardous substances on the surface of the protective gown or polluted by the environment while taking off the protective gown safely. After washing and decontamination, taking off the chemical protective gown also needs to follow certain procedures:

1)Untie each tie from bottom to top.

2)Take off the hood, pull the breast to under your shoulders. When taking off the gloves, retract your hands into the cuffs and grasp the inner sleeves, and take off your gloves and jacket with your hands behind your back.

3)Put your hands in the waistband and turn outwards, take off the pants.

4)Remove the air breathing apparatus and take off the gas mask.

4. Matters needing attention when putting on and taking off protective gown

In the process of work, it should be noted that when chemical protective gown is continuously contaminated by chemical substances, it must be replaced within the specified protective time. If chemical protective gown is damaged, it should be replaced immediately.


1)For airtight protective gown or non-airtight protective clothing with good airtightness, since they work in a relatively isolated space, it is recommended to follow the principle of two companions, that is, at least two people enter the work area together. The equipment can be rescued in time in case of a situation.

2)The chemical protective gown fabric can provide effective protection for several hours, but if you wear an air respirator, the working time is determined by the working time of the air respirator. Pay attention to the effective use time of the air respirator and replace it in advance before the cylinder is used up. And when calculating effective working time, the time spent on walking and changing equipment should be considered.

3)Before taking off the protective gloves, try to avoid touching the outer surface of the protective gown. After taking off the gloves, try to touch the inner surface of the protective gown. After the protective gown is taken off, the inner surface should face outward, and the outer surface and contaminants should be wrapped. Inside, prevent pollutants from contacting the human body and the environment. The protective equipment taken off should be treated in a centralized manner to avoid expanding pollution during this process.


Contact Us

Dongguan Dingyang

Tel.: +86 139 2925 1282

Telephone: +86 139 2925 1282

E-mail: adison@dingyangproduct.com

WeChat: +86 139 2925 1282

Add.: Rm.201, 191 Shipai Zhongxin Road, Shipai, Dongguan, Guangdong, China